The installation of the chimney through the wall: what should be considered
The device of the chimney of the furnace through the wall is completely not complicated. But here there are peculiarities and nuances and how to install a chimney through the wall, we will consider in this article. Also in the video in this article and photo you can see the most significant areas of work and get the necessary recommendations.
The content of the article
Features of the installation of the internal structure
Installation bath stove through the wall may be different, a distinctive feature of a horizontal chimney is its effective heating. It is simple to describe the entire heating system: first, the combustion products rise up, and then, due to the area of the chimney, good heating is ensured.
Attention: It should be remembered that in the case of installing a chimney through the wall, in no case sharp corners should be allowed, because they are sources of turbulence.
It is important to pay attention to the thickness of the seams. Indeed, in the case of the slightest discrepancy, the internal section changes. And, of course, it is necessary to ensure that the pipe does not become clogged with soot, as this can lead to poor traction.
All work will look in the following order:
| We determine the model of the chimney | This indicator will depend on the structure itself. After all, the insulation system will be different. And the height will be determined depending on the location of the unit itself. |
| We make calculations | Here we need to consider the height of the pipe and the number of connections. We also look at the transitions. After all, it will be necessary to take accessories for this. |
| We buy a chimney | It is better to take a chimney made of stainless steel, and not just chrome plated. After all, the coating will quickly peel off and you will have to do a pipe replacement. |
| We do the installation | The installation system is basically the same. There can only be a difference in pipe insulation. On our site you will find detailed instructions for fixing and installing each type. |
Installation steps
Installation through the wall of a coaxial chimney and any other is done in stages. There are of course features in the fasteners of different systems.
But there is something that unites all systems:
- The first stage involves the adhesion of the pipe to the boiler, and then the installation of the structure follows. Before starting the installation, make a marking of the place, and then make holes through which the pipe will pass.
- After you have completed the first step, proceed to the installation of the nozzle. It should be based on pre-made holes in the opening, and it should also be borne in mind that it must be insulated with mineral wool.
- After that, it is necessary to connect the chimney together with the heater. To do this, take a 90 degree elbow and dock it with a tee.
- What to do if you need to change the direction of the chimney? To do this, take the tee, and use the bracket as a fixation. It can be easily removed if there is a need for cleaning.
- After this, it is necessary to install the gas outlet pipe on the wall, for which it is best to use fasteners with an interval of up to 2 meters.
The final step will be the conclusion of the whole structure through the overhang of the roof.
Attention: It is extremely important to remember that in the place where the construction will be removed, in no case should the pipe elements be connected to each other.
At the end of the work, install a special umbrella over the structure that will prevent precipitation from entering the chimney.
The specifics of installing a chimney through a wooden wall
The installation of a chimney through the wall in a wooden house requires a careful approach, because the tree is quite easily ignited. For example, installing a chimney pipe from a column into a wall does not provide for such fire safety rules.
So:
- If you want to install a pipe through a wooden wall, be sure to insulate it with a non-combustible material.
- All this is done on the basis of fire safety rules, which guarantee the efficient operation of the gas exhaust system. Following the rules prevents regular calls to repair departments.
- The best option is to perform a vertical installation by passing it through a wooden wall. This option involves the use of a perfectly flat pipe, as well as traction control, which occurs due to the gate.
- To mount the structure, make equal intervals, and cover the top with a special cap.
Caution: Do not forget that installing a gas exhaust system is an important procedure that must be carefully prepared. The more thoroughly you prepare, the more efficient the whole system will work.
Recommendations from specialists
All work can be done with your own hands. Walls in the bath the device will depend on the material used. But on this topic, there are recommendations of professionals and it is worth listening to them.
- Before buying and installing a system for the removal of combustion products, you need to find out at what capacity the heating device works. It should also be based on the choice of pipe diameter.
- It is necessary to calculate the length of the installation in order to obtain ultimately good traction. Without it, the design will not work as efficiently. Remember that the chimney through the wall should not be too long or short.
- With a long chimney length, smoke and soot can enter the house, and with a small chimney there is a possibility of rapid fuel consumption. In case of too much draft, the chimney loses its effectiveness, since not only the gases “leave” the room, but also the heat.
- In order to prevent such cases, professionals advise to perform all installation work, follow all the rules. Connection of the chimney to the boiler must be done using a bend, tee or pipe.
- If you install a heating device in an already finished house, then remember that it is very difficult to make installing a chimney in a classic way. In this case, it’s best not only lead the chimney through the wallbut also install pipes on the front of the building.
- The entire structure must be insulated, since in case of strong heating the wall may collapse.
There are two ways to achieve isolation:
- Using the wall pass assembly (pipes have a diameter that is higher than the main one, and also have installed plates for protection);
- With filling the space between the wall and the installation with mineral wool.
- If your house has a load-bearing wall, then installing a chimney will not take much effort and cost. You will not encounter difficulties in the passage of the chimney through the roof and floors. In addition, the installation of the chimney does not take so much time.
Attention: Your task is to select the correct chimney parameters and to connect the structure. If you make even minor mistakes in the installation process, then the operation of the chimney will be ineffective and, moreover, dangerous.
How to arrange the walls in the bath will tell you the instructions for the pipe itself. After all, they are of different configurations. The price will depend on this. But if you carefully read the recommendations and decide on the installation system, then the work will be performed efficiently.
