Stone corridor decoration: types of material
Decorating the corridor with decorative stone, today, has become the most popular, due to the high prices of other modern materials. Decorative stone is used as an additional accent.
Stone decoration of openings and arches looks very stylish and beautiful, especially if the material has an unusual texture and relief.
The content of the article
Decorating with decorative stone corridor, material characteristics
In order to qualitatively decorate the corridor with a stone, it is necessary to choose exactly the material that is suitable for decoration walls in the hallway.
Among the materials you can distinguish 2 types of artificial stone:
- Made of colored concrete.
- Based on gypsum.
Attention. To determine the right choice, it is recommended to find out the main characteristics and compare them with each other.
- Unlike gypsum, colored concrete is more difficult to process. To trim it, you will need a grinder with a diamond disk, while gypsum stone can be trimmed without difficulty.
- Plaster material is much lighter (about 2 times than concrete). This indicator is especially important if finishing is done on a drywall construction that is not located under heavy loads.
In addition, gypsum stone can be installed with your own hands, without professional help.
- In terms of external indicators, both materials are virtually impossible to distinguish. In both cases, they have a rich color gamut, and a different texture.
Finishing with artificial stone in the corridor will significantly save your time and money. Material is sold in a purely white design, then you can paint the material yourself at your discretion. - The price of gypsum material is slightly lower by about 100-150 rubles per 1 sq.m.
Tip. On sale there are ordinary and corner elements of decorative stone, which are 2 times more expensive. If you buy gypsum material, it is better to purchase solid elements and join them yourself to save on finishing.
In almost all respects, the gypsum finish with a stone of the corridor wins, but still it has drawbacks: the strength of the material is lower than that of non-ferrous concrete and fear of moisture. Of course, for the corridor it is best to purchase gypsum-polymer material, which has a protective layer from moisture and mechanical damage.
Tip. To combat humid environments and pollution, you can cover the gypsum decorative stone with acrylic varnish.
Corridor decoration with artificial stone, technology
All finishing work begins with the preparation of the premises and the foundation of the wall surface. If the walls are relatively smooth and clean, then you can safely pick up corridor decoration ideas stone and get to work.
Otherwise, it is necessary to clean the wall to the base, to remove significant irregularities and defects.
Attention! If the unevenness on the wall is more than 5 mm, it is necessary to carry out all the finishing work and plaster. For better grip at the finish, the surface must be primed.
You can watch a training video on this subject on our website.
So:
- In order for the stone finish to look like a corridor beautifully and harmoniously, it is recommended to lay out all the plates on the floor before starting work and achieve a visualization of the most natural surface. Elements should be arranged so that there are no too large gaps, differences and color differences.
See the photo how the stone is laid.
- For installation, it is recommended to use liquid nails or a special adhesive for gypsum material. If for some reason there are no adhesive mixtures, you can use the usual universal cement-based adhesive.
But when working, it is necessary to observe increased accuracy so that there are no dark spots and smudges. - Finishing stone openings starts from top to bottom from the corner, be sure to use the building level to control even rows. To adjust the material and sawing, a hacksaw for gypsum elements is used.
Corner Joining Instructions
There are several methods that are most often used for joining corners.
Let's consider some of them:
- In construction stores special corner elements are sold, it is a little expensive, but an attractive appearance and speed are guaranteed.
- Sometimes, lap elements are installed for quick and inexpensive finishes, but at the same time one end will be open.
- Trim the edges at an angle of 45 degrees, though the finish will take more time, but it will save money.
Tip. In order to give the room a beautiful effect, they install tiles of irregularly broken shape, the edges can be cut with a knife, file or filed with sandpaper.
In order to give the room a three-dimensional appearance, it is recommended to make additional lighting from above and from the side.
After laying the stone on the walls, minor defects will appear in the form of:
- Drops.
- Chipped.
- Color differences.
- Cracks.
In order to fix all the defects, you need the help of an airbrush: preparing a mixture of water, acrylic varnish, a composition of color.
To give greater expressiveness to the wall, it is necessary to apply spraying with a more darkened color at an oblique angle. In order to extend the life of the material, it is recommended to cover the decorative stone with matt acrylic varnish.
The value of decorative stone in the interior and its properties
The original interior with decorative stone in a small room will look different than in the corridor-hallway of a large house (seeDecorating the hallway with decorative stone: interior ideas) Thanks to different textures, shapes and sizes, you can create unique interiors.
Often you can observe the use of stone tiles in the corridors, which successfully combines with any finishing material:
- Wallpaper.
- Stucco molding.
- Plaster.
- Drywall.
By combining various materials with decorative stone, you can achieve an excellent effect, and the light weight of gypsum stone makes the finish more convenient and simple.
Conclusion and recommendations
Today, users are given a great opportunity to choose decorative models. The price depends on the specifics of the product and the manufacturer.
In addition to ready-made models, you can make an application for individual parameters. In the process of choosing the right model for your premises, it is recommended to be guided by your own preferences.
