Interior decoration of gas silicate blocks

Maslyakova Svetlana

Good afternoon. What you need to finish the internal walls of the weekend house (Heating upon arrival). The material of the walls is a gas silicate block lined with half brick. thank

Interior decoration

Hello. This material is becoming increasingly popular in construction. This is due to its durability and long operational period. Exterior finish does not cause trouble and problems, but it is worth talking about the features of the interior decoration in more detail.

The main types of interior decoration

There are two main finishing methods:

• Steamproof.
• Vapor permeable.

The vapor permeable method is the most popular.

Note. But here it is necessary to remember first of all about the correct choice of material, which will characterize a high level of vapor permeable.

The vapor-proof method is not whimsical at all and does not require any additional frills.

How to choose the material for interior decoration

The interior finish is radically different from the outer lining. It is important to choose the raw materials that will be different:

• A high level of aesthetics.
• Easy to operate.
• Long service life.

For interior decoration, frame materials are most often used, such as:

• Decorative panels.
• PVC panels.
• Drywall.

Thanks to the materials listed, you will not need to level the walls.

Installation of a lathing for panels

Before installing the material, we need to install a reliable and durable frame. Under it you need to install:

• Vapor barrier.
• Waterproofing.

For the frame you will need: bars or slats. Installation of rails begins from the ceiling or floor.

Note. During installation work, it is important to correctly set the bars strictly according to the level, in order to avoid distortion of the structure.

Panel Installation

Next stage:

• Between the bars below and above we pull the thread.
• Then the bars are mounted in the gap (in increments of 0.5 m).
• Self-tapping screws are used as fasteners.

Then set the profile upper and lower. Then we install the panels themselves in the grooves and strengthen them with studs or staples. Panels are mounted one after another. Each panel is checked for evenness. Given that the room and heating are used upon arrival, this is the best option for installation work.