How to decorate the walls on the balcony: modern options

Gusevsky Andrey Anatolyevich

How to sheathe the walls on the balcony
How to sheathe the walls on the balcony

How to sheathe the walls on the balcony are thought by many owners. After all, the choice of material is very large. Here it is necessary to approach first of all from the purpose of this room. After all, it is quite different. There are combined with the room, but there are just cold.

So in a noya article we will figure out what materials and when it is better to apply. Also in the video in this article and photo you can see ready-made solutions that may suit you.

Balcony options and finishes

Until recently, many balconies were just a warehouse of unnecessary things. Children's bicycles, old skis, toys and old shoes could lie for years without use. Now the attitude to this room has changed.

Attention: The better to finish the walls on the balcony depends on the type of balcony, on its purpose and on the premises that are located nearby.

  • The use of modern finishing, heat-insulating and soundproof materials allows you to create optimal, comfortable conditions in this room.
  • With a skillful approach to decoration, a balcony can become a comfortable place to relax, and not just a place for hanging clothes.
  • On the open balcony, the choice for decoration is significantly limited. Many finishing materials do not respond well to external weather conditions. It is necessary to take into account temperature differences, humidity and exposure to sunlight.
Cold balconyThe balcony is coldIf you plan to use additional space as a room for storing things or drying clothes, then “cold” insulation is suitable.
  • The glazing of such a room may be minimal. Suitable aluminum sliding structures with one glass. The walls and fencing of the balcony require minimal protection against moisture, dust and noise.
  • Sealed gap insulation will require primary attention. It is necessary to equip the parapet, and fix the ebbs. Plastic siding not afraid of temperature changes and high humidity. For this purpose, tile is also suitable.
  • It will not be superfluous to take care of installing the device for drying clothes. Such dryers come in many forms. They can be positioned on the outside, mounted on the ceiling, on the wall, or mounted on the floor.
Warm balcony

The balcony is warm
The balcony is warm
The loggia, insulated according to all the rules, can become a continuation of the room or be a separate room. In such a room, insulation must pass in accordance with all the rules, in compliance with all installation technologies. Sometimes it will be necessary to remove the balcony wall in order to expand the space.
  • Glazing should be capital. Window constructions are used, which are used for residential premises. It is necessary to use double-glazed windows, which consists of several glasses that are tightly interconnected.
  • Plastic or wooden frames can be used depending on the general purpose and interior decoration. This is no longer just protection against noise and environmental influences. It is possible to use modern technologies in window systems. The window can be equipped with an energy-saving or self-cleaning system.
  • Insulating materials will help to insulate the floor. You can install floor heating. Finishing the floor will allow you to choose various materials that are used indoors. It can be a tile, lining, artificial or natural stone, cork.
Combined balcony

 We combine a balcony with a room
We combine a balcony with a room
There is no problem to combine the loggia with the room.
  • It is necessary to install high-quality hydro and vapor barrier. For this purpose, the isolon is suitable. This material is made of foamed polyethylene with cells that are filled with air.
  • The design solutions of the main room are better to use when decorating the balcony. Drywall is suitable for primary finishing (see.Facing plasterboard walls: how to make), walls can also be plastered.

We select the necessary material

To choose the finishing materials for the loggia, you need to use the following tips:

  • The material must be resistant to ultraviolet radiation;
  • Choose materials with a long shelf life;
  • Do not forget that on "cold" balconies at different times of the year there will be a difference in temperature and humidity;

Attention: If you are making a cold room, then you need to think about its isolation. After all, you can not allow cold air to enter the room.

When carrying out finishing work, you can use various materials:

  • Lining - euro lining of various types and materials;
  • MDF
  • PVC panels;
  • Plasterboard panels as a basis for decoration;
  • Ceramic tiles and artificial stone;
  • Stucco made in different techniques.

Lining

Lining is a classic finish (seeLining decoration: features of work performance) It has been used for balconies and loggias since Soviet times.

Shaped rail and clapboard are the main components of this type of finish. There are differences in the processing of the edges of the rails. The standard version has right angles, while the softline has rounded corners.

An example of finishing a balcony with a clapboard
An example of finishing a balcony with a clapboard

You can choose two main types of laying lining, each of which will suit your type of room.

Here the most influential factor will be the size of the balcony or loggia itself:

Vertical laying

Vertical lining mount
Vertical lining mount
This option is suitable for installation in rooms where low ceilings or dark color finishes. Also in this way you can visually raise the ceiling.
Horizontal lining mount

Horizontal lining mount
Horizontal lining mount
The horizontal option has its undeniable advantages:
  • The room expands when laid horizontally. Vertical placement makes the ceiling taller.
  • The direction of the rails must be determined in advance, since the supporting elements must be installed perpendicular to the location of the finishing rails.
  • The walls of this finish look more homely and comfortable. This option requires more attention to heat and waterproofing. Additional processing of wooden elements is required.

 

 

PVC panels

Plastic lining, more resistant to low temperatures and high humidity.

PVC balcony trim
PVC balcony trim
  • It tolerates temperature extremes and high humidity. Wet cleaning can be done without problems.
  • PVC panels - Suitable material for open loggias and balconies. A rich color palette allows you to choose the right color. Modern technology allows you to diversify the texture of the material.
  • Matte or glossy surfaces will help to use the finish in different styles. Individual elements are fastened with nails along the edge of the rail. There are models using special fasteners.
  • For the design of corners, slopes and openings, additional plastic elements are used.

MDF panels

Plastic panels and MDF will diversify the interior of the loggia (see.Decorating a balcony with MDF panels is not a bad way to ennoble a room).

The use of MDF for decorating a balcony
The use of MDF for decorating a balcony
  • Pressed wood chip panels can be veneered with different types of wood. If the price of such panels is high, then you can choose a more economical option.
  • Laminated film panels are available. Material for loggias and balconies is better to use moisture resistant, even if the room is well insulated. Additionally, the surface of MDF is better to be varnished.
  • The same material can be used to finish niches and built-in cabinets.

Caution: This material is moisture resistant. But there are limitations. If you get water on your balcony, then this type of panel should not be installed. But if your balcony is combined with the room, then this material can be used without problems.

Drywall

Drywall is suitable for organizing additional decorative elements. It is a good base for painting walls, it can be glued with wallpaper or tile. Installation technology is quite simple.

The use of drywall in the decoration of the balcony
The use of drywall in the decoration of the balcony
  • Under such a coating, you can hide the imperfections of the walls. A profile frame is attached to the rough surface. Simultaneously with the installation of the frame, you can mount the wiring. The whole structure is fastened with self-tapping screws, they are mounted with a step of 30 cm. The joints between the sheets and the heads of the self-tapping screws are coated with putty. If necessary, additional impregnation of the entire surface is performed.
  • Further decoration of the loggia is carried out taking into account the design decisions made in the main room.
  • On the balcony or loggia, you can install additional lighting or air conditioning. Built-in wardrobes and shelves not only decorate the interior, but also help organize a storage system.

Making the crate

Regardless of how to decorate the walls on the balcony, any finishing material is attached to the crate. This work can be completely done with your own hands and not bear the costs of the craftsmen.

Let's look at this question in more detail:

Training

Doing the preparation of the walls
Doing the preparation of the walls
Here we do an inspection of the room. Completely remove the old coating. The junction of the balcony slab to the wall should be airtight and not leak water.

Attention: If the balcony moves away from the wall, then work should not be carried out. It is necessary to call the masters and make the mount rigid and reliable.

Choose the material of the crate

Metal crate
Metal crate
It can be made of metal or wood.

The first option is better to tolerate a humid environment, but more difficult to process.

In the second case, it will be necessary to do a preliminary treatment with antiseptics and only after that do the installation.

Lathing mount

We fix the crate
We fix the crate
At this stage, we need to make the correct placement of the crate. It should be in one axis.

For a balcony along the wall, measure and pull the line diagonally and put marks on the walls along the height of the crate material.

First, the extreme beams are fastened and then intermediate ones, which should also be in the same plane.

Insulation mount

Insulation
Insulation
Walls on the balcony should be insulated, this will reduce heating costs.

We place the insulation between the rails, and it can not be deformed, otherwise it loses its properties.

Finishing material fastening

Finishing Installation
Finishing Installation
And now the finishing material is attached to the crate. Depending on which mount you have chosen and done, there are a lot of materials and you can read about installing any of them on the pages of our website.

Finish the balcony walls also under the general design, if the room is combined with the room. If not, then choosing a finishing material and be sure to make insulation and check the fastening of the balcony to the wall. After that, the instruction will help you do everything yourself and in a short time.

Add a comment

Materials

Doors

Wallpaper